Qualified Rigger and Signal Person Training, Irondale GA
Qualified Rigger & Signal Person Training
- Understanding basic crane safety and set-up
- Learn new caught between / pinch point regulations
- Understand new ground condition regulations for cranes
- Learn new overhead power line regulations
- Signal Person Regulations
- Rigging Training and Regulations
- Practical and written testing
- Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference
Who is a qualified rigger?
A qualified rigger is a rigger who meets the criteria for a qualified person. Employers must determine whether a person is qualified to perform specific rigging tasks. Each qualified rigger may have different credentials or experience.
Does OSHA require riggers to be certified?
Formal qualification or certification in rigging is not required, as long as the employer can show the rigger has knowledge, experience and training in rigging and can demonstrate that he can solve rigging problems. Employers are not required to have riggers independently tested or assessed.
What does a certified rigger do?
A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.
More About Our OSHA Inspection Course
Bermac is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Bermac know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:
- Understanding basic crane safety and set-up
- Learn new caught between / pinch point regulations
- Understand new ground condition regulations for cranes
- Learn new overhead power line regulations
- Signal Person Regulations
- Rigging Training and Regulations
- Practical and written testing
- Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference
No matter the size of your organization, Bermac can help deliver the safety services your company needs.
A Bermac consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.
Irondale, GA
Irondale is a census-designated place (CDP) in Clayton County, Georgia, United States. The population was 7,446 at the 2010 census.
Irondale is located south of the center of Clayton County at 33°28′32″N 84°21′37″W / 33.47556°N 84.36028°W / 33.47556; -84.36028 (33.475430, -84.360326). U.S. Routes 19 and 41 form the eastern edge of the CDP and lead north 3 miles (5 km) to Jonesboro, the county seat. Downtown Atlanta is 20 miles (32 km) to the north.
According to the United States Census Bureau, the Irondale CDP has a total area of 3.2 square miles (8.3 km2), of which 3.2 square miles (8.2 km2) is land and 0.04 square miles (0.1 km2), or 1.47%, is water.
As of the census of 2000, there were 7,727 people, 2,543 households, and 2,049 families residing in the CDP. The population density was 2,414.8 people per square mile (932.3/km²). There were 2,649 housing units at an average density of 827.8/sq mi (319.6/km²). The racial makeup of the CDP was 46.84% White, 47.09% African American, 0.49% Native American, 1.92% Asian, 0.01% Pacific Islander, 1.53% from other races, and 2.12% from two or more races. Hispanic or Latino of any race were 4.18% of the population.
There were 2,543 households out of which 50.9% had children under the age of 18 living with them, 57.0% were married couples living together, 18.4% had a female householder with no husband present, and 19.4% were non-families. 15.6% of all households were made up of individuals and 1.6% had someone living alone who was 65 years of age or older. The average household size was 3.04 and the average family size was 3.37.
Bermac Headquarters: Atlanta, GA
8100 Roswell Road
Suite 410
Atlanta, GA 30350
1.877.7BERMAC (723.7622)
Rigger and Signal Person Training in Irondale GA
- OSHA Construction Safety Consulting
- Mock OSHA Inspections
- OSHA Safety Training
- Third-Party Site Safety Assessments
- Written Health and Safety Programs and Safety Documentation
- Safety Staffing
- DOT/Fleet Safety Programs
- OSHA Citation Defense
- Workers Compensation Claims Management
Industries in Irondale, GA that we work with include:
- General Contractors
- Specialty Contractors
- Residential Contractors
- Industrial/Manufacturing
- Trucking/Fleet Industries
- Environmental Contractors
- Sanitation Companies
- Grocers
- Quasi-Public Companies
- Landfills
- Automotive
- Injection molding
- Sheet Metal Stamping
- Paper/Tissue Mills
- Mobile and Tower Crane
- Milling and Paving
For Businesses located in Irondale, GA in need of Rigger and Signal Person Training
Other cities in Clayton County area that we are serving in: