Qualified Rigger and Signal Person Training, Brunswick GA
Qualified Rigger & Signal Person Training
- Understanding basic crane safety and set-up
- Learn new caught between / pinch point regulations
- Understand new ground condition regulations for cranes
- Learn new overhead power line regulations
- Signal Person Regulations
- Rigging Training and Regulations
- Practical and written testing
- Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference
Who is a qualified rigger?
A qualified rigger is a rigger who meets the criteria for a qualified person. Employers must determine whether a person is qualified to perform specific rigging tasks. Each qualified rigger may have different credentials or experience.
Does OSHA require riggers to be certified?
Formal qualification or certification in rigging is not required, as long as the employer can show the rigger has knowledge, experience and training in rigging and can demonstrate that he can solve rigging problems. Employers are not required to have riggers independently tested or assessed.
What does a certified rigger do?
A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.
More About Our OSHA Inspection Course
Bermac is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Bermac know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:
- Understanding basic crane safety and set-up
- Learn new caught between / pinch point regulations
- Understand new ground condition regulations for cranes
- Learn new overhead power line regulations
- Signal Person Regulations
- Rigging Training and Regulations
- Practical and written testing
- Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference
No matter the size of your organization, Bermac can help deliver the safety services your company needs.
A Bermac consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.
Brunswick, GA
Brunswick (/ˈbrʌnzwɪk/) is a city in and the county seat of Glynn County, Georgia, United States. As the main urban and economic center of the state’s lower southeast, it is the second-largest urban area on the Georgia coast after Savannah and contains the Brunswick Old Town Historic District.
British colonists settled the peninsula in 1738 as a buffer to Spanish Florida. It came under provincial[clarification needed] control in 1771 and was founded as “Brunswick” after the German duchy of Brunswick–Lüneburg, the ancestral home of the House of Hanover. It was incorporated as a city in 1856. Throughout its history, Brunswick has served as an important port city: in World War II, it served as a strategic military location with an operational base for escort blimps and a shipbuilding facility for the U.S. Maritime Commission.
Brunswick supports a progressive economy largely based on tourism and logistics, with a metropolitan GDP of $3.9 billion. The Port of Brunswick handles approximately 10 percent of all U.S. roll-on/roll-off trade—third in the U.S., behind the ports of Los Angeles and Newark. The headquarters of the Federal Law Enforcement Training Center is located 5 miles (8 km) north of the central business district of the city and is adjacent to Brunswick Golden Isles Airport, which provides commercial air service to the area. In the 2010 U.S. census, the population of the city proper was 15,383; the urban area, 51,024; and the metropolitan area, 112,370.
Brunswick is located on a harbor of the Atlantic Ocean, approximately 40 mi (60 km) north of Florida and 80 mi (130 km) south of South Carolina. Brunswick is bordered on the west by Oglethorpe Bay, the East River, and the Turtle River. It is bordered on the south by the Brunswick River and on the east by the Atlantic Intracoastal Waterway in the Mackay River, which separates it from the Golden Isles.
Bermac Headquarters: Atlanta, GA
8100 Roswell Road
Suite 410
Atlanta, GA 30350
1.877.7BERMAC (723.7622)
Rigger and Signal Person Training in Brunswick GA
- OSHA Construction Safety Consulting
- Mock OSHA Inspections
- OSHA Safety Training
- Third-Party Site Safety Assessments
- Written Health and Safety Programs and Safety Documentation
- Safety Staffing
- DOT/Fleet Safety Programs
- OSHA Citation Defense
- Workers Compensation Claims Management
Industries in Brunswick, GA that we work with include:
- General Contractors
- Specialty Contractors
- Residential Contractors
- Industrial/Manufacturing
- Trucking/Fleet Industries
- Environmental Contractors
- Sanitation Companies
- Grocers
- Quasi-Public Companies
- Landfills
- Automotive
- Injection molding
- Sheet Metal Stamping
- Paper/Tissue Mills
- Mobile and Tower Crane
- Milling and Paving
For Businesses located in Brunswick, GA in need of Rigger and Signal Person Training
Other cities in Glynn County area that we are serving in: