877-723-7622 Growing Safely Across the Nation

Rigger and Signal Person Training Red Hill SC

Qualified Rigger and Signal Person Training, Red Hill SC

Qualified Rigger & Signal Person Training

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

Who is a qualified rigger?

qualified rigger is a rigger who meets the criteria for a qualified person. Employers must determine whether a person is qualified to perform specific rigging tasks. Each qualified rigger may have different credentials or experience.

Does OSHA require riggers to be certified?

Formal qualification or certification in rigging is not required, as long as the employer can show the rigger has knowledge, experience and training in rigging and can demonstrate that he can solve rigging problems. Employers are not required to have riggers independently tested or assessed.

What does a certified rigger do?

certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.

More About Our OSHA Inspection Course

Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.

A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.

Safety Consultants USA Location – Charlotte, NC

Charlotte, NC

712 Lindholm Drive
Suite 300
Huntersville, NC 28078
(704) 626-6196
Fax: (704) 626-6195

Request For Information
  • This field is for validation purposes and should be left unchanged.
Our mission is to provide a high engagement, interactive, safety and health learning experience for our clients.

Red Hill, SC

Red Hill is a census-designated place (CDP) in Horry County, South Carolina, United States. The population was 13,223 at the 2010 census, up from 10,509 at the 2000 census.

Red Hill is in south-central Horry County at 33°47′18″N 79°0′49″W / 33.78833°N 79.01361°W / 33.78833; -79.01361 (33.788368, -79.013715). It is bordered to the north by the city of Conway, the county seat, and to the south by Socastee. U.S. Route 501 passes through the northern part of Red Hill, connecting Conway to the north with Myrtle Beach, 12 miles (19 km) to the southeast. South Carolina Highway 544 runs north–south the length of Red Hill, connecting Conway with Socastee. The west side of Red Hill is bordered by the Waccamaw National Wildlife Refuge.

According to the United States Census Bureau, the CDP has a total area of 11.4 square miles (29.4 km2), of which 11.3 square miles (29.2 km2) are land and 0.1 square miles (0.2 km2), or 0.52%, are water.

At the 2000 census there were 10,509 people, 4,189 households, and 3,066 families living in the CDP. The population density was 961.4 people per square mile (371.2/km²). There were 5,026 housing units at an average density of 459.8 per square mile (177.5/km²). The racial makeup of the CDP was 88.70% White, 7.34% African American, 0.59% Native American, 0.78% Asian, 0.08% Pacific Islander, 1.22% from other races, and 1.30% from two or more races. Hispanic or Latino of any race were 3.11%.

Of the 4,189 households 31.3% had children under the age of 18 living with them, 58.1% were married couples living together, 11.4% had a female householder with no husband present, and 26.8% were non-families. 19.4% of households were one person and 6.4% were one person aged 65 or older. The average household size was 2.50 and the average family size was 2.83.

Rigger and Signal Person Training in Red Hill, SC

Our OSHA safety consulting services include:

  • OSHA Construction Safety Consulting
  • Mock OSHA Inspections
  • OSHA Safety Training
  • Third-Party Site Safety Assessments
  • Written Health and Safety Programs and Safety Documentation
  • Safety Staffing
  • DOT/Fleet Safety Programs
  • OSHA Citation Defense
  • Workers Compensation Claims Management
Safety Consultants USA’s experienced trainers will work with you to ensure that your employees receive the training they need to work safely, while also incorporating your company-specific procedures into your safety training class.  Our trainers have years of experience in the field and are better able to engage your employees during their safety training classes than other less experienced safety professionals.

Industries in Red Hill, SC that we work with include:

  • General Contractors
  • Specialty Contractors
  • Residential Contractors
  • Industrial/Manufacturing
  • Trucking/Fleet Industries
  • Environmental Contractors
  • Sanitation Companies
  • Grocers
  • Quasi-Public Companies
  • Landfills
  • Automotive
  • Injection molding
  • Sheet Metal Stamping
  • Paper/Tissue Mills
  • Mobile and Tower Crane
  • Milling and Paving

For Businesses located in Red Hill, SC in need of Rigger and Signal Person Training

No matter the size of your organization, or how ambitious your safety goals, Safety Consultants USA can deliver the safety services your company needs. A Safety Consultants USA consultant is standing by to provide a quote on your next project. Call us at 877-723-7622.

Other services that we offer in the region:

[page-generator-pro-related-links group_id=”10497,10501,10502″ post_status=”publish” post_parent=”south-carolina/Red Hill” output_type=”list_links” limit=”0″ columns=”2″ link_title=”%title” link_anchor_title=”%title” link_featured_image=”0″ orderby=”rand” order=”asc”]

Cities in the area that our Rigger and Signal Person Training are serving in:

[page-generator-pro-related-links group_id=”10098″ output_type=”list_links” link_title=”%title” limit=”0″ columns=”4″ parent_title=”%title” next_title=”%title »” prev_title=”« %title” post_status=”publish” post_parent=”south-carolina” orderby=”none” order=”asc”]